LS055R1SX04 5.5" LCD with 9H Tempered Glass for 3D Printer

The listed is LS055D1SX04 LCD Panel with 9H Tempered Glass.
The back light is not removed.
The dimension of the 9H Tempered Glass is 145.5 x 87mm with R5.0mm corners.
The glass is pressed and bonded with the LCD panel by clear OCA.
The glass is made of tempered borosilicate glass with UV and visible light transmission rate >99.5%.
The glass was fired at a very long time to ensure the durability. Compare to regular PVC or polymer tempered glass,
borosilicate glass has both higher UV transmission and surface hardness.
There is 3M doubleside tape around the back of the glass for installation.
 
Free 2-3 days priority mail within the US is included.
 
Each unit is fully tested to be working before shipping.
This item is provided with no instruction or support.
 
Please do research before ordering, make sure this LCD will work for your setup. Returns are not accepted.
 
The datasheet of the LCD panel:
https://ds0.me/LS055D1SX04.pdf
Some key specification of LS055D1SX04:
• Manufacturer: SHARP
• Model Name: LS055R1SX04
• Screen Size: 5.5 inch
• Screen Type: LCM, CG-Silicon
• Pixel Number: 1440(RGB)×2560 (Quad-HD)
• Arrangement: RGB Vertical Stripe
• Active Area(mm): 68.04 × 120.96 (H×V)
• Outline(mm): 70.94 × 128.49 × 1.45 (H×V×D)
• Luminance: 450 cd/m² (Typ.)
• Contrast Ratio: 1300 : 1 (Typ.) (TM)
• Viewing Angle: 80/80/80/80 (Typ.)(CR≥10)
• Response: 35 (Max.)(Tr+Td) ms
• Good View at: Symmetry
• Work Mode: New Mode2, Normally Black, Transmissive
• Color Depth: 16.7M 70% (CIE1931)
• Backlight: 8S2P WLED , No Driver
• Mass: 25.0g (Typ.)
• Refresh Rate: 60Hz
• Touchscreen: Without
• Signal Type: MIPI (2 ch, 4 data lanes) , Connector , 50 pins
• Voltage Supply: 1.8/5.75/-5.75V (Typ.)(IOVCC/VSP/VSN)
• Max. Ratings: Storage Temp.: -30 ~ 70 °C Operating Temp.: -20 ~ 60 °C